Thursday, March 28, 2019

Physics of the Lathe :: physics lathe wood

How much forest could a timberland toss out chuck if a timberland chuck could chuck wood? An age sometime(a) tongue tornado that has never been answered. In this rhyme, the common assumption is that the woodchuck is a low-pitched furry groundhog like creature, but there is another pattern of wood chuck that is not as common but could chuck wood. Here we allow explore this path of answering this age old riddle.In the production of many wood products a common manufacturing jibe known as a lathe is employ, and to shit the wood in the lathe a chuck is used. In order to calculate the amount of wood a wood chuck can chuck we must first decide how the wood will be chucked. When wood chucking the chuck will be spinning around the spike heel and an attachment will be used that will act as a catcher that will be on the outer radius of the chuck. We will also be satisfactory to calculate the velocity of the wood leaving the chuck and the kinetic energy.Lathes & ChucksA LATHE is a machine tool designed primarily to do turning, facing, and boring. Their versatility permits multiplex operations to be done with a single setup of the workpiece. Consequently, the lathe is the approximately common machine tool. The lathe used to theoretically calculate the amount of wood that can be chucked is the TECHNO CNC WOOD LATHE. This lathe has a spindle speed charge per unit from 500 to 2000 RPM, which will be used to calculate the amount of wood chucked.The Chuck is an attachment that is the most commonly used way to hold a workpiece on the lathe. It attaches to the spindle on the lathe and is spun by it at speeds up to 4000 RPM depending on the lathe. The chuck that will be used for our calculations will have an approximate mass of 4 kilograms and a diameter of 6 inches.Wood ChuckingTo calculate the amount of wood that is chucked, and the other properties of wood chucking, apply the TECHNO CNC WOOD LATHE the following values and assumptions will be used * The sp indle speed of the lathe has a range of 500-2000 RPM * The diameter of the chuck is 6 in. approximately 15 cm. * A one kilogram block of wood made out of American Spruce with a density of .

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.